Select an Address app - official feature request thread

20 Comments

  • Official comment
    Tiffany Green

    Jordan - would the feature introduced with the paid tier give you the functionality you're looking for? It allows you to set a default based on a group, as well as narrowing the allowed emails per group. https://support.zendesk.com/hc/en-us/articles/360042173634-Installing-and-using-the-Select-an-Address-app

  • Jordan Prangnell

    Hi 

    We have multiple support addresses (over 100) - what we would find useful is that the app will automatically select the email address we are going to send our support request from based on the group / assignee on the ticket. 

    We're aware this does it automatically for inbound tickets and you can filter down the support email address through JSON and relevant groups that user is in but for us the agent still has multiple addresses to select from each time. 

    Our particular issue is with raising Zendesk tickets proactively to the customer. 

    Thanks

    2
  • Fabian Sanchis

    Hi Team,

    We just upgraded our Select an Address app (Basic Plan now) and there are a couple of things that might be a deal breaker. Perhaps there is already a solution for it but I could not find it.

    We have several support views and different teams, so we all have now only our email, which is great but also:  

    1) Every time an Agent Opens the ticket, it updates it "This email will be sent from", updating the ticket and therefore changing the update time. This confuses things unfortunately as then the tickets are not in the right order. 

    2) Now when we create an internal ticket for another team and press "New", the ticket defaults back to the queue of the agent and it does not go to the correct place. 

    The workaround is to create the ticket as Open, but this didn't happen before and now it does.

    Is there any feedback you can provide me with? Issue 2 I know is due to the mailing filters we have but I don't seem to be able to find the correct trigger. 

    Thank you for your help with this.

    Fabian

    1
  • Chris Fellows

    Hi @...,

    Thanks for posting your question here.   On item number 1, are these tickets being created from the Help Center?  I am going to create a support ticket on your behalf so that we can look into this in more detail.

    Chris

    0
  • Erica Sutherland

    We just upgraded to the Basic plan so that upon ticket creation we could default a send from address based upon the group that the creator of the ticket is in. My understanding after contacting the advocacy team is that the Basic Plan does not apply during the ticket creation step and only on tickets that are not generated via email. Nowhere in the documentation about this app is that clarified which is misleading, making our upgrade completely pointless. We have 50+ support addresses with regional defaults and categorization to align with our user groups. Is there any plan to clarify this, or can this be developed to function as described during the step of creating tickets in the support app?

    For our company this would have a very high business impact especially as we onboard larger numbers of clients. 

    0
  • Tiffany Green

    @... Hi! -

    It's possible there may have been some miscommunication when you talked with our advocacy team. The default based on groups does work for tickets created via the +Add button at the top of the screen. Is that what you meant by ticket creation step? The app also works on tickets that come in via email, as the app is triggered as soon as an agent enters a ticket.

    Or were you referring to the mobile app? Unfortunately, none of the marketplace apps work in the mobile app.

    Hopefully that helps clarify, but let us know if you have further questions or clarifications.

    Thanks!

    0
  • Erica Sutherland

    EDIT/UPDATE: I am not quite sure what happened but I subscribed again and gave it another go and it miraculously worked. I don't know if I had an error in my JSON that I was missing... or what. Perhaps there was a delay despite refreshing, who knows. 

    When I initially I tested it out while using the (+)Add button at the top of the screen and it did not function at all, but it started displaying updates on existing tickets. I was informed that it specifically does not work during the ticket creation step when I called in to address. I initially cancelled our subscription as a result, but I might be ok here. 

    0
  • Tiffany Green

    @...

    Glad to hear it's working for you now! It may have been an issue of it not updating immediately. That happens rarely, but it has happened.

    Thanks for updating your comment!

    0
  • Itamar Bitton- engineer

    Hi, we are creating ticket via APIs and we would like to know if there is an option to combine your solution with Zendesk create ticket API?

    Thanks

    0
  • Chris Fellows

    Hi Itamar,

    If you use the API to create a ticket and set the status as New, when an agent opens the ticket for the first time the mapping of default address in the setting should apply at that point.  This only works on tickets with a New status so make sure they a being set that way and it should work.

    Chris

    0
  • Fabian Sanchis

    Hi Tiffany,

    I hope you are well! You helped us a lot when installing the app last year! Thank you. After months of using it we got use to the email changing to the Default when an agent was entering a ticket. 

    For a few months now, this feature stopped. The Support Team has been helpful in helping me with this case, however the feedback is that the app was never meant to work that way (so updating the default email when entering a ticket). 

    This is very confusing and is causing lots of issues as the email is no longer changing and we are sending email from the wrong user groups.

    Can you help us with this? Thanks

    0
  • Chris Fellows

    Hi Fabian,

    I went ahead and created a ticket for this so we can take a look.

    Chris

    0
  • 蘇詩婷

    「select an address」についていくつか意見があります。
    1. 二人のエージェントが同じチケットを開いた場合、片方が「select an address」の内容を変更しても、もう一人の画面上のアプリパネルでリアルタイムで表示されません。
    これをリアルタイムで反映するようお願いします。

    2. トリガで「select an address」の内容を条件として設定できるようにしてほしいです。

    3. ビューで「select an address」の内容を表示できるようにしてほしいです。
    一覧でどのチケットはどのメールアドレスで返信したかを確認したいため、
    Exploreでの属性も「select an address」を追加してほしいです。

     

    Google Translate:

    There are some opinions about "select an address".


    1. If two agents open the same ticket, even if one changes the content of "select an address", it will not be displayed in real time on the app panel on the other one's screen.
    Please reflect this in real time.

    2. I want you to be able to set the content of "select an address" as a condition in the trigger.

    3. I want you to be able to display the contents of "select an address" in the view.
    Because I want to check which ticket was replied with which email address in the list,
    I want you to add "select an address" to the attribute in Explore, too.

    1
  • Phil Andrews

    Hi 👋

    Feature request: The ability to have an email address automatically select based on a particular macro would be really handy for agents that are part of multiple groups that create outbound emails from macros.

    Thanks!

    4
  • Terry Ehrhard

    Feature Request: In Paid Version, it is required that there must be a default address.   We have many groups that support multiple vendors and thus multiple address, therefore having a default address causes the Agent to not have to select an address that corresponds with the correct vendor they are servicing.  When this occurs it causes confusion with address used containing the wrong vendor.  Therefore we want the Agent to deliberately have to select an address since no default exists.

    We request to make the Default Address optional.  In these cases where no default address exists, if the Agent forgets to select an address, give an error message that an address must be selected before Ticket can be created/saved.

    1
  • Amie

    Hey Everyone,

    this app is no longer a paid app. All built by Zendesk apps are now free. :)

    Best,

    Amie

     

    0
  • Nathan Purcell

    To echo Phil, having the sender field from Select an Address macroable would be incredibly helpful! 

    2
  • Dave Dyson
    Zendesk Community Manager
    HI everyone – as a reminder, please upvote product feedback threads you're interested in. Thanks!
    0
  • Nathan Purcell

    How many votes does it take for something to be considered? 

    0
  • Nicole Saunders
    Zendesk Community Manager

    Hi Nathan, 

    There's not a set threshold at which a request is considered, but conversations with more votes have more visibility. The assumption is that more votes means more users are interested in a certain feature, and features that have the impact on the most users get higher priority. 

    0

Please sign in to leave a comment.

Powered by Zendesk