*Result metric calculations* enable you to add a further calculation to a query you have
already taken. For example, if you've created a query to calculate a cost of service for your
tickets (see Calculating estimated cost of service for an example),
and you want to add a ten percent margin to this, you could use a result metric calculation.

## Creating a result metric calculation

**To create a result metric calculation**

- With an Explore query open, click the result manipulation menu (), then select
**Result metric calculation**. - Click
**Add a new metric**. - On the
**Result metric calculation**panel, enter the name of your metric. - Enter your formula. For help writing formulas, see Writing Explore formulas.
- Select
**Clear used metrics**to hide other metrics from the query results and only show the result metric calculation. The metrics are still used in the result metric calculation, but the results will not appear in your chart. - Click
**Add**, then close the**Result metric calculation**panel. The new result metric calculation is added to the query. - Your calculation is automatically added to the open query.
- In your query, click
**Save**.

## Example: Calculating the percentage of on-hold tickets

In this example, you'll create a query that shows the total number of tickets, and the number of on-hold tickets for any given year. Then, you'll add a result metric calculation that displays the percentage of on-hold tickets.

## Creating the query

**To create the query**

- In Explore, create a new query using the
**Support: Tickets**dataset. - In the
**Metrics**panel, add the following metrics:**COUNT(Tickets)****COUNT(On-hold tickets)**

- In the
**Filters**panel, add the following attribute:**Ticket created - Year**

- From the visualization type menu (), choose
**Table**.Explore displays a table showing the total number of tickets and the number of on-hold tickets. You can click the

**Ticket created - Year**filter to filter your results to specific years. - Enter a name for the query, then click
**Save**.

## Adding the result metric calculation

**To add the result metric calculation**

- With an Explore query open, click the result manipulation menu (), then select
**Result metric calculation**. - Click
**Add a new metric**. - On the
**Result metric calculation**panel, enter the name of your metric,**Percentage of on-hold tickets**. - Enter the following
formula:
`COUNT(On-hold tickets)/COUNT(Tickets)`

The

**Result metric calculation**panel will look like the following example: - Click
**Add**, then close the**Result metric calculation**panel. The new result metric calculation is added to the query. - Next, you need to display the new calculation as a percentage. In the chart
configuration menu (), click
**Display format**. - On the
**Display format**panel, click the drop-down list next to your metric,**SUM(Percentage of on-hold tickets)**. - From the list of display formats, choose percentage, (
**%**). The result metric calculation in your query now displays a percentage. - In your query, click
**Save**.

## 28 Comments

Hi Rob,

What if I wanted to compare the total tickets from last month versus the total tickets from this month to provide a percentage of how this month's ticket volume compares to last month's ticket volume. Then the end result would be a KPI displaying the percentage that this month's ticket volume would be over or under last month's ticket volume. If it were over there would be a green up arrow pointing up or the text would be green. If it were under, then there would be a red arrow pointing down or the text would be red.

Insights does this, but I haven't figured out how to get Explore to accomplish this. Thank you.

Hi Eric, here's how I managed to do this.

1. Create two Date range calculated metrics:

Tickets this month(Original metric: Tickets, Defined on: Ticket created, Date range: This month)Tickets last month(Original metric: Tickets, Defined on: Ticket created, Date range: last month)2. Add both of these metrics to the metrics panel. Tickets this month should be the top-most metric.

3. In the chart configuration menu to the right, click Chart. In the Chart menu, enable "Show variation" and set "Variation type" to Percentage.

That gave me this:

I hope this helps, or gives you some pointers to get started!

Rob Stack would you be willing to share the calculated metric you created?

Rob Stack I do not want the "24 804" to display on the stat. Can you explain how I'd get rid of this? Thank you.

Also, I'm not seeing the "Show variation" or the "Variation type" fields. See below. Thoughts?

Bobby Koch It's actually two date range calculated metrics. You'll find that option just below the standard calculated metric. They should be set up with the following settings:

Name: Tickets this month(Original metric: Tickets, Defined on: Ticket created, Date range: This month)Name: Tickets last month(Original metric: Tickets, Defined on: Ticket created, Date range: last month)Eric Haley the Chart menu differs depending on which chart type you select. It looks like in your screenshot the Table type is selected. Could you try again with the KPI chart type selected.

Sorry, but I don't see a way to remove the other number. You can make it smaller (Value style) or change its' color (Value style). One thing I guess you could do is to make that number the same color as your background, thus making it invisible. That's not perfect when you add it to a dashboard but with some resizing you can make it look quite good.

Thanks, Rob Stack. That was it. Now, unfortunately, I discovered a new problem. I have a time filter on my report. When I change the month of the report, the stat drops to 0 tickets (down by 100%). I think this is because the "Tickets Created - This Month" and "Tickets Created - Last Month" metrics are static; thus always referring to the current and the previous month, regardless of what the time filter states. Is there are a way to do this so that the stat comes out dynamic, switching to the time frame that the time filter stipulates? Thanks again.

Eric Haley If you've added your percentage change query to the dashboard, you could exclude it from the time filter:

Hello,

I am trying to show the percentage of each category but the formula text box border is red and I cant figure out what am I doing wrong.

Right now this query is shared in different Dashboards and I would like to add a column that shows the %.

What formula should I be using in order to do so? If I go to display options and select % I get this.

Any help would be appreciated.

Hi Jorge Marques could you share the formula (that's showing red)? Happy to take a look at this!

Hiya all

I am also suffering from not being able to work on my metrics. I have added my screenshot. What I want it to do is show the percentage of items reported/removed over the years and this to be shown in a line graph. I have tried creating a new attribute (so it is a metric) and using the result metric calculation - neither of these is work for me. Can you help?

Hi Zara Roddis thanks for the question! It looks like you're using custom metrics here. Would you mind sharing the formulas you used, then we can take a look. Thanks!

Is there a way to do a result metric calculation on a result metric calculation?

I am looking at grouping MED(First Reply Time (hrs)) into 4 buckets. I would then like to get a count of how many times each bucket shows up as a percentage of the whole. My chart looks like this:

"Traffic Light" is a metric calculation that uses an IF/THEN formula to group Reply Times into buckets. (eg. IF [time] > 1 THEN 4 ELIF...) etc.

So now I want to know what percentage of cells (in the whole table) are a 4, a 3, a 2, and a 1. And preferably, only display that.

Hello Geoffrey Gallinger,

The only way to accomplish this would be to create your initial result metric calc as a custom metric instead and then use that in a result metric calculation. Otherwise, there is no native way to accomplish this at this time.

Best regards.

Hi, I need to find out top 10 reason on monthly level, for eg, i want to know what would be the top 10 result for each month for this year.

Right now when i try to pull a stacked chart and apply Top 10 on Result manupilation then it gives me top 10 reason based on year and not on individual month and hence the result vary based on , when we look for single month alone and when we look for all month

I hope you can understand what i am try to explain.

Let me know how to solve this :)

Hello Priyalakshmi,

We would love to troubleshoot this for you, but we will need a little more information first. If you could share a screenshot of your query or define exactly what "top 10 reason on monthly level" means, it would be greatly appreciated.

Best regards.

Hello, I've added a metric to a query using "Line" visualization using a result metric calculation. The metric displays values as expected. However, I would like to apply the 'dual axis' view to this calculated metric - but as it does not display under my list of metrics in the top right corner, I cannot do so. Is there any way to apply options such as 'tooltip' or 'dual axis' to metrics calculated in this way?

Hi,

Thank Devan for the reply.

I have added the screenshot, so what I mean is when we create a chart month wise for one particular year and then through result manipulation we select top /bottom and show only top 10 attributes , so the result that is display is based on top 10 attribute across the year and not month wise individually i.e. those 10 attributes which has highest percentage in all the month are display instead of those month wise top 10. I hope this helps, if not then please let me know.

Hello Priyalakshmi & Lionel

I reached out to the product team, and neither of these requests are currently possible in Explore. I've shared this with our devs, but I would recommend sharing your use case in our product feedback forum.

Hi, how can I order my result metric calculations? I have a table and I want my result metrics to appear before my regular metric columns. I'm able to re-order regular metrics by dragging and dropping but I'm have not found a way to do the same with result metrics.

Also, why is not possible to edit the format (color for example) of result metrics? I would love to display my results in different colors depending on their values.

I've currently got a table that has two metrics on it and a result metric calculation that computes an SLA for our 30 second or less call answer times. I've been asked to create a sparkline or line chart that looks at the SLA value over time, but every time I try to create a chart it wants to use the metrics for the chart instead of the result metric calculation. Is there any way to hide those other metrics from a chart and only display the result metric calculation?

Hi pstrauss thanks for asking such a good question. You can select the checkbox at the bottom of the calculation screen to remove the original metrics from the display. It looks like this:

That should then leave only the calculation available for visualization. I hope that helps!

Chris Bulin - Ah hah! That's brilliant. You're a life saver. Thanks.

Hey!

I am trying to set up a start condition for calculating the response time. For example, I need to count the time since the appearance of a certain tag in the ticket and not since the moment of its creation. What is the best formula to use?

Is it possible to make the Result Metric Calculation display on the secondary axis of a line chart?

Also, can we add Result Metric Calculations to the datatip available fields?

Hello Max Semenov and Joe Gran

I created for you tickets so I can discuss with both of you what you need to achieve more in detail

You should have receive a notification about it.

Hi there,

I have a metric A and a metric B in my query in absolute numbers monthly and when I add a ratio of them in % using the result metric calculation it's added to the query against the existing axis Y. Because the axis Y is in absolute numbers the ratio metric in % can barely be seen.

Is it possible to add a second axis using the result metric calc function? I know I can create and add a third custom metric with ratio, but wondering if it's possible to do via result metric calculation. Below is the screenshot how it looks

Thanks

Please sign in to leave a comment.